HoMedics AP-T10FL - User Manual

8
4. Slide the new HEPA-type filter
into the filter cavity.
To purchase genuine HoMedics replacement HEPA-type filters, model AP-T10FL, go back to the retailer where you purchased your air purifier,
or visit www.homedics.com (US), www.homedics.ca (CAN).
1. Unplug the air purifier and turn
upside down. Turn the filter cover
as indicated to remove.
2. Remove the filter cover and
set aside.
FILTER REPLACEMENT
REPLACE FILTER NOTIFICATION
The power button will flash red when it is time to replace the HEPA-type filter based on the air purifier’s hours
of use.
REPLACING THE HEPA-TYPE FILTER
For optimal performance, replace every 12 months under normal usage conditions.
3. Pull to remove the old filter.

Summary

Filter Replacement

Replace Filter Notification

The power button will flash red indicating the HEPA-type filter replacement is due based on usage hours.

Replacing the HEPA-Type Filter

Provides instructions for replacing the HEPA-type filter, including removal of the old filter and installation of a new one.

HoMedics AP-T10FL Specifications

General

Brand	HoMedics
Model	AP-T10FL
Category	Water Filtration Systems
Language	English