User Manual
Page 37 of 43
Are Gigabit Ethernet adapters required for use with HomePlug AV?
No. Under ideal conditions, HomePlug AV has a physical gross data rate of up to 200
Mbps. The effective net data rate is somewhat lower. A 100 Mbps Ethernet adapter is
therefore adequate in most cases.
Does the technology support multicast video server streams (IP-TV)?
Yes.
Is HomePlug AV restricted to a specified region?
No. HomePlug AV uses three kinds of pins for different regions. These are:
•
(UK) – 3 pins UK plug with switch mode AC power supply
• (EUR) – 2 pins Euro plug with switch mode AC power supply
• (US) – 2 pins US plug with switch mode AC power supply
Do I need an Automatic Voltage Regulator (AVR) for HomePlug AV?
No. HomePlug AV can operate in an environment using 100-240Vac (US and Euro), 220-
240 Vac (UK).
How many HomePlug AVs can operate in one household?
Up to 15 devices can be used within the household.
What is the maximum range of HomePlug AV?
The maximum range is 200 meters.
If one HomePlug AV is connected to a LAN switch, is it possible for other computers
in the switch to communicate with other HomePlug AV devices?
Yes.
Can my neighbors access my HomePlug AV network?
Your electric meter prevents any signal from going outside your household. However, we
strongly suggest that you create your own personalized Private Network Name to
prevent unauthorized access into your network.
To Next Page
Loading...