To Next PageTo Next Page
Need help?Do you have a question about the Homestyles 6654-83 and is the answer not in the manual?
Connect the Legs (F) to the Seat (A) using short Head Cap Bolts, Spring Washers, and Flat Washers.
Fasten the Arms (B and C) to the unit with middle Head Cap Bolts, Spring Washers, and Flat Washers, tightening halfway.
Insert Axle (H), attach Wheels (G) with short Head Cap Bolts, and secure Axle (H) with Short Bolts.
Connect the Support (E) to the Back (D) using Head Cap Bolts, Spring Washers, Flat Washers, and Plastic Washers.
Attach Back (D) with long Head Cap Bolts, tighten all bolts, add Caps to wheels, and level the unit.
Avoid leaving liquids on furniture and do not use glass cleaners to prevent damage.
Prevent cracking, fading, marking, finish damage, discoloring, and yellowing by following specific usage rules.
Clean the furniture with a soft cloth moistened in lukewarm soap and water, then buff with a dry cloth.
This document provides assembly instructions and care guidelines for a Homestyles Chaise, a piece of outdoor furniture designed for relaxation. The chaise is constructed primarily from aluminum, emphasizing its lightweight yet durable nature.
The Homestyles Chaise serves as a comfortable outdoor seating option, ideal for lounging in a garden, patio, or poolside setting. Its primary function is to provide a reclined position for relaxation, sunbathing, or reading outdoors. The design incorporates wheels, suggesting ease of movement and repositioning, allowing users to adjust its location to follow the sun or find shade as desired. The adjustable levelers on the bottom indicate that it can be stabilized on uneven surfaces, enhancing its versatility across various outdoor environments. The chaise is designed to be assembled by the end-user, with clear instructions provided to guide the process.
The assembly process for the Homestyles Chaise is broken down into several manageable steps, each focusing on attaching specific components. Users begin by attaching the legs to the seat, ensuring stability for the main body of the chaise. This step involves using head cap bolts, spring washers, and flat washers, which are common fasteners in furniture assembly, providing a secure connection. The inclusion of spring washers helps to maintain tension and prevent loosening over time, while flat washers distribute the load, protecting the material.
Next, the arms are attached to the main unit. This step is crucial for defining the shape and providing support for the user's arms. The instructions specify tightening these bolts only halfway initially, a common practice in furniture assembly to allow for slight adjustments and alignment of all parts before final tightening. This prevents stress on the material and ensures all components fit together correctly.
A key feature of this chaise is its mobility, facilitated by the inclusion of wheels. The assembly instructions detail how to insert the axle and attach the wheels. The wheels are designed with a large hole in the center, which should face the outside of the unit, indicating a specific orientation for proper function and aesthetics. Similar to the arms, the bolts for the wheels are initially tightened halfway, allowing for alignment before securing them fully. The axle is then locked in place with short bolts, ensuring the wheels remain firmly attached during movement.
The backrest of the chaise is designed to be adjustable, a common feature in loungers for varying comfort levels. The support for the backrest is attached using a combination of head cap bolts, spring washers, flat washers, and plastic washers. The plastic washers are likely included to prevent direct metal-on-metal contact, reducing friction, noise, and potential wear or scratching between the support and the backrest. Again, these bolts are initially tightened halfway.
Once all major components are attached, the unit is turned upright, and the backrest is attached to the main unit. This step also involves head cap bolts, spring washers, flat washers, and plastic washers, with the same halfway tightening instruction. The final stage of assembly involves tightening all bolts that were previously left halfway. This systematic approach ensures that the entire structure is properly aligned and then securely fastened, providing a stable and safe product.
After assembly, the center wheel holes are covered with caps, which likely serve both an aesthetic purpose, by concealing the bolt heads, and a protective one, by preventing dirt or debris from entering the axle mechanism. Finally, the chaise is leveled using adjustable levelers located on the bottom of the unit. This feature is important for stability and comfort, especially on uneven outdoor surfaces, preventing wobbling and ensuring a consistent user experience.
The manual provides comprehensive care instructions to ensure the longevity and appearance of the Homestyles Chaise. These instructions are categorized into "NEVER" and "CLEAN" sections, offering clear guidelines on what to avoid and how to properly clean the furniture.
The manual also includes important information regarding customer service and warranty. Homestyles commits to providing free replacements for missing or damaged parts within two years of purchase, provided digital images of defective parts are supplied. It specifies that this warranty is valid only if the product was purchased from an authorized retailer. Furthermore, replacement parts are not available for fully assembled items or for sale, highlighting the importance of addressing issues during the initial assembly phase. This comprehensive approach to care and customer support aims to ensure a satisfactory and long-lasting experience with the Homestyles Chaise.
General| Product Name | Homestyles 6654-83 |
|---|---|
| Category | Outdoor Furnishing |
| Finish | Powder Coated |
| Color | Black |
| Weight Capacity | 250 lbs |
| Assembly Required | Yes |
| Material | Aluminum |
