2
Quick Reference Guide
1. Prior to plugging your heater into a convenient outlet, first
verify that the circuit breaker for the outlet is on.
2. The heater may emit a slight, harmless odour when first used.
This odour is normal and is caused by the initial heating of
internal heater parts and will not occur again.
3. If the heater does not emit heat, consult your operation manual
for further information.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN THE HEATER
NO USER-SERVICEABLE PARTS INSIDE
HIGH TEMPERATURE
KEEP ELECTRICAL CORDS, DRAPERY AND OTHER
FURNISHINGS AT LEAST 3 FEET (0.9M) FROM FRONT OF THE HEATER
AND KEEP THEM AWAY FROM THE SIDES OF HEATER
WARNING
RISK OF FIRE-KEEP COMBUSTIBLE MATERIAL AWAY FROM FRONT OF
HEATER. SERVICING SHOULD BE DONE ONLY WHILE THE HEATER IS
UNPLUGGED FROM POWER SUPPLY.
LIGHT BULB CHANGING CAUTION
REPLACE ONLY WITH E12 CLEAR, CANDLE TYPE (SCREW FITTING)
RATING 110-120V, 40W MAXIMUM FOR ALL LIGHT BULBS.
To Next Page