Need help?Do you have a question about the HomLux X002TZLIND and is the answer not in the manual?
General| Brand | HomLux |
|---|---|
| Model | X002TZLIND |
| Category | Indoor Furnishing |
| Language | English |
Read instructions carefully before installation for safe and correct setup.
Product components are ETL LISTED and certified.
Crucial safety guidelines for installation and operation, including grounding and power handling.
Information on the power cable, plug, and wall switch connection.
Instructions on how to clean the mirror safely using soft, damp cloths.
Technical specifications and features of the LED Wall-mounted Mirror.
How to control the light's on/off state and cycle through warm, white, and warm white light.
Instructions on how to turn on the light and adjust brightness by holding the touch sensor.
How to activate the anti-fog feature using the touch sensor.
Stick spacers on the mirror backside and measure the distance of A/B for mounting.
Mark two dots on the wall using the measured A/B distance and drill holes.
Place white nylon plugs into drilled holes and screw them in.
Hang the mirror onto the prepared wall mounts.
Connect the mirror's 3-pin plug directly into a wall socket for power.
Connect the mirror wire with wall switch wire via a connector.
Wipe with a soft dry cloth; avoid harsh cleaners and damp environments.
Details on the 1-year warranty, excluding artificial damage and normal wear.
To Next Page