Honda 1996 TRX400 User Manual

Provides critical safety warnings and precautions for operating the ATV.

Details the importance of vehicle labels and understanding safety information.

Identifies key components and controls of the ATV with diagrams.

Details the function and operation of the ignition switch and engine stop switch.

Explains the operation of headlights, dimmer switches, and indicator lamps.

Explains the operation of the gearshift pedal and reverse selector knob.

Details the operation of front brakes, rear brake, and parking brake.

Covers the fuel gauge and fuel fill cap operation.

Details the procedure for checking the oil level and adding oil if needed.

Provides recommendations for engine oil viscosity and type for optimal performance.

Outlines pre-ride preparations, including rider preparation and vehicle checks.

Discusses age recommendations, rider training, and vehicle preparation for riding.

Details pre-ride inspections, including checks for fluids, brakes, tires, and controls.

Explains how to check and maintain proper tire pressure for safe operation.

Details how to check tire tread depth and wear indicators for safety.

Specifies maximum weight capacities for cargo and towing.

Provides guidelines for carrying cargo and towing trailers safely.

Emphasizes the importance of wearing appropriate protective gear while riding.

States that the ATV is designed for operator-only use and prohibits carrying passengers.

Warns against operating the ATV after consuming alcohol or drugs.

Emphasizes that the ATV is designed and manufactured for off-road use only.

Stresses the importance of maintaining proper hand and foot placement on controls during operation.

Advises on controlling speed based on vehicle capability, terrain, and conditions.

Warns against performing stunts like wheelies, jumps, or other dangerous maneuvers.

Advises caution and thorough terrain checks before riding on unfamiliar or limited visibility areas.

Emphasizes using extra care on rough, slippery, or loose terrain.

Details the steps for starting a cold or warm engine, including choke usage.

Provides instructions on how to clear a flooded engine if it fails to start.

Explains techniques for turning safely on level ground, including body lean.

Discusses how to adjust weight and techniques for turning on slopes.

Provides a schedule for routine inspections, adjustments, and replacements.

Lists the standard tools provided with the ATV for basic maintenance.

Details the procedure for refueling the ATV, including fuel capacity and cap tightening.

Provides guidance on the type of gasoline and octane rating to use.

Explains the use of gasoline blended with ethanol or MTBE.

Covers the operation of the throttle cable and lever, including free play adjustment.

Details the steps for cleaning and maintaining the air cleaner element and housing.

Explains the operation of the choke and its adjustment.

Provides instructions for adjusting idle speed and the air-fuel mixture.

Details the procedure for checking the oil level and adding oil if needed.

Provides recommendations for engine oil viscosity and type for optimal performance.

Step-by-step guide for draining oil and replacing the oil filter.

Explains the procedure for adjusting the clutch for proper operation.

Details how to adjust the free play in the reverse assist lever.

Information on the battery, its location, handling precautions, and storage.

Step-by-step guide for safely removing and reinstalling the vehicle's battery.

Explains the location of fuses and provides instructions for their replacement.

Guides on checking front brake lever free play and shoe lining thickness.

Instructions on how to adjust the front brake lining clearance.

Details how to check the brake fluid level and related precautions.

Guides on checking and adjusting the free play of the rear brake pedal.

Explains how to check the wear of the rear brake shoes.

Step-by-step instructions for removing and installing vehicle wheels.

Covers checking and maintaining proper tire inflation pressure.

Details how to check tire tread depth and wear indicators.

Specifies tire sizes and recommended pressures for front and rear tires.

Details how to check tire tread depth and wear indicators for safety.

Provides instructions on how to properly secure the ATV for transportation using tie downs.

Details recommended procedures for washing and cleaning the ATV.

Outlines steps for storing the ATV for extended periods to prevent deterioration.

Covers dimensions, weight, capacities, and basic engine/chassis data.

Lists electrical system specifications and fuse ratings.

Explains regulations regarding tampering with the noise control system.