Open the hatch. Determine which bulb, taillight,
stop/taillight, back-up light, side
marker light or turn signal is
burned out. Remove the socket for
that bulb by turning counterclock-
wise.
Remove the socket for that bulb
by turning it one-quarter turn
counterclockwise.
Remove the burned out bulb from
thesocketbypushingitinand
turning the bulb counterclockwise
until it unlocks.
Install the new bulb in the socket.
Reinstall the socket in the tail-light
assembly and turn it clockwise to
lock it in place.
Testthelightstomakesurethe
new bulb is working. Reinstall the
cover over the taillight assembly.
Remove the cover from the inside
panel by carefully prying on its
upper front edge with a small flat-
tipped screwdriver.
1. 3.
2.
4.
5.
6.
7.
8.
Replacing Rear Bulbs
Lights
Maintenance
206
CCOOVVEERR
To Next Page
Loading...
