When you reset a trip meter, the
average fuel mileage for that trip
meter also resets.
When a trip meter is displayed, the
average fuel mileage you have been
getting during that trip is shown in
the Fuel Mileage display. This
number is updated once per minute.
This display can be turned off at any
time. See page .
You can use this function to display
the distance and average fuel
mileage for a segment of a trip.
To display the segment distance and
fuel mileage, press and release the
FCD Select button. The Segment
Display indicator will come on to
remind you that this is the segment
distance and fuel mileage display.
To reset the display, press and hold
the FCD Select button until the
display resets to zero and dashes.
The system then begins displaying
the distance and average fuel
mileage from that point. The display
is updated once per minute.
To switch between the segment
display and the Trip Meter/
Odometer display, press and release
the FCD Select button.
55
Gauges
Instruments and Controls
Trip Mileage Segment Distance and Fuel
Mileage
54
TTRRIIPP MMIILLEEAAGGEE ((TTRRIIPP AA))
SSEEGGMMEENNTT
DDIISSPPLLAAYY
IINNDDIICCAATTOORR
FFCCDD SSEELLEECCTT BBUUTTTTOONN
To Next Page
Loading...
