Push the appropriate edge of the
adjustment switch to move the
mirrorright,left,up,ordown.
When you finish, move the
selector switch to the center (off)
position. This turns off the
adjustment switch so you can’t
move a mirror out of position by
accidentally bumping the switch.
To apply the parking brake, pull the
lever up fully. To release it, pull up
slightly, push the button, and lower
the lever. The parking brake light on
the instrument panel should go out
when the parking brake is fully
released (see page ). If you try to
drive the vehicle without releasing
the parking brake, the ABS indicator
maycomeon,andtheABSmaynot
work properly.
3.
4.
46
Parking Brake
Mirrors, Parking Brake
Instruments and Controls
81
Driving the car with the parking brake
applied can damage the rear brakes
and axles.
０２／０８／０６ １８：１９：３０ ３１Ｓ２Ａ６３０ ００８４
To Next Page