Attach the tether strap hook to the
tether anchorage point on the
underside of the seat cushion,
then tighten the strap as
instructed by the child seat maker.
Make sure the strap is not twisted.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Other LATCH-compatible seats have
a flexible-type connection as shown
above.
Place the child seat on the vehicle
seat, and attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connection as
shown above.
4.
5.
6.
3.
Installing a Child Seat
Driver and Passenger Safety
34
FLEXIBLE TYPE
RIGID TYPE
To Next Page