Honda 2005 CRF250X - Bearing Replacement; Shock Arm Needle Bearing; Shock Linkage Inspection

INSPECTION
Check the dust seals and collars for wear, damage
or fatigue.
Check the needle bearings for damage or loose fit.
Check the shock arm f or cracks or damage .
If the needle bearings are damaged , replace them.
Check t he dust seals and collars for wear, damage
or fatigue .
Check the needle bear i ngs for damage or loose fit.
Check the shock link for cracks or damage.
If the needle bear ings are damaged, replace them .
BEARING REPLACEMENT
SHOCK ARM NEEDLE BEARING
Press the needle bearings ~shock link side,
swing arm side) out of the shock link using the spe-
cial too ls and a hydraulic press.
TOOLS:
Driver
Attachment , 24 )C 26 mm
Pilot, 20 mm
Attachment , 30 mm 1.0.
07949·3110001
07746·0010700
07746·0040500
07746·0030300
Press the needle bearing (shock absorbe r side) out
of the shock link using special tools and a hydraulic
press .
TOOLS:
Driver
Att achme nt , 24)( 26 mm
Pil ot, 19 mm
Attachment , 30 mm 1.0.
07749-0010000
07746-0010700
07746-0041400
07746-0030300
REAR WHEEl/SUSPENSION
SI DE COLLARS
PIVOT COLLARS
·; 16
,j 0
"
DUST SEAL
SIDE COLLARS
PIVOT COLLAR DUST SEALS
14-31