4 of 5 AII 28615 (0502) © 2005 American Honda Motor Co., Inc. - All Rights Reserved.
11. Plug the BUS cable 14-pin connector into the
audio unit and into the player. Install the harness
clip to the rear of the player with the 4 x 8 mm
washer-screw.
13. Plug the vehicle connectors into the audio unit,
and into the player.
HARNESS
CLIP
4 x 8 mm
WASHER-
SCREW
BUS
CABLE
14-PIN
CONNECTOR
AUDIO
UNIT
PLAYER
AUDIO
UNIT
PLAYER
HAZARD
SWITCH
CONNECTOR
VEHICLE 20-PIN
CONNECTOR
ANTENNA
CONNECTOR
VEHICLE 14-PIN
CONNECTOR or ACCESSORY
XM RADIO 14-PIN
CONNECTOR
(If equipped)
10. Install the hazard switch (removed in step 6) into
the player panel.
4701031T
PLAYER
PANEL
HAZARD
SWITCH
12. Secure the BUS cable with the harness clip.
BUS CABLE
HARNESS CLIP
To Next Page
Loading...
