Honda 2007 Accord Coupe User Manual

Remove the electrical connector
fromthebulbbysqueezingthe
connector to unlock the tab, then
slide the connector off the bulb.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
To change the passenger’s side
bulb, start the engine, turn the
steering wheel all the way to the
left, and turn off the engine. To
change the driver’s side bulb, turn
the steering wheel to the right.
Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
Pull the inner fender cover away
from the fender and bumper.
To change the low beam headlight
bulb on the driver’s side, remove
the air intake duct. You can reach
the air intake duct from the back
side of the inner fender.
6.
5.
4.
1.
2.
3.
On EX-V6 model with manual
transmission
Low Beam Headlight
Lights
248
AIR INTAKE DUCT
EX-V6 with M/T
HOLDING CLIPS
Main Menu
Table of Contents
s
t
Main Menu
s
t
Table of Contents

Honda 2007 Accord Coupe Specifications

General

Brand	Honda
Model	2007 Accord Coupe
Category	Automobile
Language	English