Both front seats are equipped with
seat heaters. The ignition switch
must be in the ON (II) position to
use the heaters.
Push the front of the switch, HI, to
rapidly heat up the seat. After the
seat reaches a comfortable
temperature, select LO by pushing
the back of the switch. This will keep
the seat warm.
In the HI setting, the heater turns off
when the seat gets warm, and turns
back on after t he seat’s temperat ure
drops.
Follow these precautions whenever
you use the seat heaters:
Use the HI setting only to heat the
seats quickly, because it draws
large amounts of current from the
battery.
If the engine is left idling for an
extended period, do not use the
seat hea ters, even on the LO
setting. It can weaken the battery,
causing hard starting.In the L O setting, the heater runs
continuously. It does not cycle with
temperature changes.
Seat Heaters (For some types)
Instruments and Controls
166
SEAT HEATER SWITCHES
06/12/06 10:50:45 32SMR600_169
To Next Page
Loading...
