▲▼
On vehicles with dual temperature
control system
On vehicles without dual temperature
control system
On vehicles with dual temperature
control system
When the recirculation indicator is
on, air from the vehicle’s interior is
sent throughout the system again.
When the indicator is of f, air is
brought in from the outside of the
vehicle (fresh air mode).
These two buttons control the
source of air going into the system.
In fresh air mode , air comes
from outside the vehicle. In
recirculation mode , the
interior air recycles through the
system.
The outside air intakes for the
climate control system are at the
base of the windscreen. Keep this
area clear of leaves and other debris.
Thesystemshouldbeleftinfresh
air mode under almost all conditions.
Keeping the system in recirculation
mode, particularly with the A/C off,
can cause the windows to f og up.
Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to f resh air
mode.
Select the fan speed by pressing the
top or bottom of the f an speed
control switch ( or ). The fan
speed is shown in vertical bars on
the display.
Press the DUAL button to select
dual temperature control mode (see
page ).
Y ou can set the t emperatures for the
driver’s side and the passenger’s side
separately when this button is
pressed (indicator is on). When the
indicator in the DUAL button is off,
you can adjust bot h sides to t he
same temperature with the driver’s
side temperature control dial.
209
CONTINUED
Recirculation Button
Fresh Air and Recirculation Buttons
Fan Control
Dual Button
Climate Control System
Features
201
06/12/06 10:55:07 32SMR600_204