If your vehicle’s battery is
disconnected or goes dead, you may
need t o set the clock.
To set the time, turn the ignition
switch to the ON (II) position to
display the time.
ChangethehourbypressingtheH
button until the numbers advance to
the desired time. Change the minute
by pressing the M button until the
numbers advance to the desired time.
For example: 1:06 will reset to 1:00
1:53 will reset to 2:00
You can quickly set the time to the
nearest hour. If the displayed time is
before the half hour, pressing t he R
buttonsetstheclockbacktothe
previous hour. If the displayed time
is after the half hour, the clock sets
forward to the beginning of the next
hour.
On vehicles without audio system
Setting the Clock
Features
272
HOUR
BUTTON
MINUTE
BUTTON
RESET
BUTTON
06/12/06 11:05:03 32SMR600_275
To Next Page
Loading...
