Honda 2007 INTERCEPTOR VFR800 - Horn Button; SELECT Button; RESET Button

−
39
Horn Button
SELECT Button
RESET Button
Controls & Features
Instruments & Controls
The horn is used to alert other motorists.
To operate, push the horn button ( ).
The SELECT button is used to switch
between the coolant and air temperature
displays. To operate, press the button.
The SELECT button is also used to
change the speed and mileage units for the
speedometer/odometer/tripmeter. To
change the unit, press and hold the button
(page ).
The SELECT button is also used to set the
digital clock (page ).
The RESET button is used to switch
between the odometer and the two
tripmeter (A & B) displays. To operate,
press the button.
To reset (zero) either tripmeter, press and
hold the button for about 2 3 seconds
until the display changes to zero.
TheRESETbuttonisalsousedtosetthe
digital clock (page ).
3
32
33
33
06/09/06 11:47:23 31MCW650_048