When the radiator and engine are
cool, relieve any pressure in the
cooling system by turning the
radiator cap counterclockwise,
without pressing down.
Remove the radiator cap by
pushing down and turning
counterclockwise.
The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.
Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.
Do not add any rust inhibitors or
other additives to your vehicle’s
cooling system. They may not be
compatible with the coolant or
engine components.
Put the radiator cap back on, and
tighten it fully.
Pourthecoolantslowlyand
carefully so you do not spill. Clean
up any spill immediately; it could
damage components in the engine
compartment.
3.
4.
5.
1.
2.
Engine Coolant
Maintenance
365
RADIATOR CAP
FILLER NECK
Fill up to here
０６／０７／２６ １８：１０：２５ ３１ＳＨＪ６２０ ０３７０
To Next Page
Loading...
Need help?
General
