Honda 2007 Odyssey User Manual

Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Slide the new wiper blade into the
holder until the tabs lock.
Lower the wiper arm against the
windshield.
Front windshield: Lower the
passenger’s side first, then the
driver’s side.
Insert both ends of the blade into the
holder.Makesuretheyaresecure.
Slide the new blade into the wiper
arm. Make sure it is engaged in the
slot along its full length.
Install the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
6.
7.
4.
5. Front Wiper :
Rear Wiper :
Wiper Blades
Maintenance
381
BLADE
REINFORCEMENT
０６／０７／２６ １８：１２：３８ ３１ＳＨＪ６２０ ０３８６

Honda 2007 Odyssey Specifications

General

Brand	Honda
Model	2007 Odyssey
Category	Automobile
Language	English