Honda 2007 Odyssey User Manual

You can store the flat tire on the top
of the folded third seat.
Pull up the U-shaped carpet piece,
fold it, and tack the end under the
carpet.
Remove the spacer, and unfasten
the plastic screw with a coin.
Remove the center cap before
storing the flat tire.
Store the spacer, plastic screw and
center cap in a noticeable place.
Place the flat tire face down on the
attachment point. Put the spacer
cone on the flat tire as shown.
Poke holes in the vinyl bag. Secure
the flat tire into the attachment
point by tightening the tire
mounting wing bolt through the
center cap hole of the flat tire
wheel.
Follow step 22 through 26 on
pages and .
Store the spacer and the plastic
screw in a noticeable place.
Make sure to reinstall the plastic
screw after the flat tire is repaired
andinstalledonthevehicle.
Store the wheel cover in the spare
tire storage area.
Install the spare tire storage cover.
1.
2.
25.
26.
27.
3.
4.
5.
401 402
On EX, EX-L and Canadian Touring
models
On LX model
Storing a Flat Tire on the Folded
Third Seat
Changing a Flat Tire
402
PLASTIC SCREW
TIRE MOUNTING
WING BOLT
ATTACHING POINT SPACER CONE
SPACER
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
securely before driving.
０６／０７／２６ １８：１５：４４ ３１ＳＨＪ６２０ ０４０７

Honda 2007 Odyssey Specifications

General

Brand	Honda
Model	2007 Odyssey
Category	Automobile
Language	English