CONTINUED
Put a cloth on the edge of the shift
lock release slot cover. Use a small
flat-tipped screwdriver or metal
fingernail file to carefully pry up
the edge of the cover and remove
it from the slot.
Insert the key in the shift lock
release slot.
This allows you to move the shift
lever out of Park if the normal
method of pushing on the brake
pedal and pressing the release
button does not work.
Set the parking brake.
Remove the key from the ignition
switch.
If you exceed the maximum speed
for the gear you are in, the engine
speed will enter into the tachometer’s
red zone. If this occurs, you may feel
the engine cut in and out. This is
caused by a limiter in the engine’s
computer controls. The engine will
run normally when you reduce the
rpm below the red zone.
1.
2.
3.
4.
Automatic Transmission
Shift Lock ReleaseEngine Speed Limiter
Driving
287
COVER
０７／０６／１５ １１：４７：２０ ３１ＴＡ０６００ ０２９２
To Next Page
Loading...
