120 Navigation System
Frequently Asked Questions
Daylight savings time occurred, but the navigation system did
not change time even though Setup shows “Auto Daylight
Saving Time” is “On.”
Go to the Clock adjustment screen in Setup and select DST Selection.
Ensure that the correct DST schedule is selected. For more information, see
Clock Adjustment on page 92.
The navigation system automatic daylight time feature is not
switching the navigation system clock on the correct dates.
Why is this?
1) Go to the Clock adjustment screen in Setup and ensure that Auto
Daylight Saving Time is On.
2) The navigation system is designed to switch to daylight savings time
according to the months selected in the DST schedule selection screen.
Ensure that the appropriate schedule is selected. For more information,
see Clock Adjustment on page 92.
The navigation system clock switched by one hour for no
apparent reason. What can cause this?
1) You may be driving near a time zone boundary (see Auto Time Zone by
GPS on page 93).
2) The navigation system does not, or incorrectly switches between
standard and Daylight Savings Time. Set Auto Daylight Saving Time
to On on the Clock adjustment screen in Setup, and ensure that the
correct month switching schedule is chosen on the DST schedule
selection screen. See page 92 for more information.
My battery was disconnected, or went dead, and the
navigation system is asking for a code. Where do I find this
code?
There should have been a card in the glove box with the anti-theft code for
the navigation/audio system. This card contains the 4-digit security code
and serial number. If you cannot find it, your dealer can help you out.
I speak a language other than English. When will other
languages be available for the navigation system?
This is being considered as a future enhancement.
Problem Solution
To Next Page
Loading...
Need help?
General
