You can change the display to the
engine oil life display, or the
odometer and trip meter by pushing
the SELECT button on the
instrument panel.
All maintenance items displayed in
the trip meter are in code. For an
explanation of these maintenance
codes, see page .
Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100%’’ on the information
display the next time you turn the
ignition switch to the ON (II)
position.
If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
follows:
Press the SELECT button
repeatedly until the engine oil life
display or the service message is
displayed.
Turn the ignition switch to the ON
(II) position.
1.
2.246
Maintenance Main Items and Sub
Items
Resetting the Engine Oil Life
Display
Maintenance Minder
242
MAINTENANCE MAIN ITEM
MAINTENANCE SUB ITEMS
０７／０４／２７ １４：１３：２９ ３１ＳＪＣ６２０ ０２４７
To Next Page
Loading...
