■ Using an outer anchor
1. Put the head restraint to its upper-most
position, then route the tether strap
through the head restraint legs. Make sure
the strap is not twisted.
2. Sec
ure the tether strap hook onto the
anchor.
3. Tighten
the tether strap as instructed by the
child seat manufacturer.
■ Using the center anchor
1. Lower the head restraint to it
s lowest
position.
2. Route the tether strap over the head
restraint. Make sure the strap is not twisted.
3. Secure the tether strap hook onto the
anchor.
4. Tighten the
tether strap as instructed by the
ch
ild seat manufacturer.
To Next Page