148 | | 149
SPECIFICATIONSMAINTENANCE
TABLE OF CONTENTSVISUAL INDEX
VOICE COMMAND
INDEX
SAFETY
INFORMATION
CUSTOMER
INFORMATION
INSTRUMENT PANEL
SPECIFICATIONS
VEHICLE
CONTROLS
MAINTENANCE
AUDIO AND
CONNECTIVITY
HANDLING THE
UNEXPECTED
BLUETOOTH®
HANDSFREELINK®
DRIVING
HONDALINK®
NAVIGATION INDEX
SPECIFICATIONS
Engine and Fuel
Displacement 91.38 cu-in (1,498 cm
3
)
Spark Plugs NGKILZKAR8H8S
*
*
1:
2:
Type
Unleaded gasoline, Pump octane number
of 87 or higher
*1
Unleaded premium gasoline, Pump octane
number of 91 or higher
*2
Fuel Tank Capacity 12.39 US gal (46.9 ℓ)
Fluids
Air Conditioning
Refrigerant Type HFO-1234yf (R-1234yf)
Lubricant Type RL85HM (POE)
4.7 – 6.28 cu. in. (77 – 103 cc)
Washer Fluid
Tank Capacity
U.S.: 2.6 US qt (2.5 ℓ)
Canada: 4.8 US qt (4.5 ℓ)
Clutch*/Brake Fluid
Continuously Variable Transmission Fluid*
Specified Honda Heavy Duty Brake Fluid DOT 3
Specified Honda HCF-2 Transmission Fluid
Capacity Change 3.9 US qt (3.7 ℓ)
Engine Coolant
Recommended
Genuine Honda Motor Oil 0W-20
API Premium-grade 0W-20 detergent oil
Capacity
Change 3.4 US qt (3.2 ℓ)
Change
including
filter
3.7 US qt (3.5 ℓ)
Specified Honda Long Life Antifreeze/Coolant Type 2
Ratio 50/50 with distilled water
Capacity
1.30 US gal (4.92 ℓ)
(change including the remaining
0.15 US gal (0.58 ℓ) in the reserve tank)
13.2 – 15.0 oz (375 – 425 g)Charge Quantity
Manual Transmission Fluid
*
Specified
Capacity
Honda Manual Transmission Fluid (MTF)
Change 2.0 US qt (1.9 ℓ)
1.28 US gal (4.84 ℓ)
1: Models with continuously variable transmission
2: Models with manual transmission
*1
*2
Tires
*
*
1: Models with 16 inch wheel
2: Models with 17 inch wheel
*
3: Models with 18 inch wheel
Regular
Size
215/55R16 93H
*1
215/50R17 91H
*2
235/40R18 91W
*3
Pressure
psi (kPa [kgf/cm
2
Front
32 (220 [2.2])
*1, *2
35 (240 [2.4])
*3
32 (220 [2.2])
*1, *2
Rear
Compact
Spare
Size
Pressure
60 (420 [4.2])
psi (kPa [kgf/cm
2
])
33 (230 [2.3])
*3
T125/80D16 97M
*1, *2
T125/70D17 98M
*3
Regular
Wheel Size
16 x 7J
*1
17 x 7J
*2
18 x 8J
*3
Compact Spare
16 x 4T
*1, *2
17 x 4T
*3
])
*if equipped
Vehicle
Model Honda Civic Hatch
No. of Passengers:
Front 2
Rear 3
Total5
*
*
1: Models with continuously variable transmission
2: Models with manual transmission
Weights:
Rating
Gross Vehicle Weight
U.S.: 3,957 lbs (1,795 kg)
*1
1,770 kg
*2
Gross Axle Weight
3,825 lbs (1,735 kg)
*2
Canada: 1,800 kg
*1
Rating (Front)
U.S.: 2,105 lbs (955 kg)
*1
925 kg
*2
1,995 lbs (905 kg)
*2
Canada: 955 kg
*1
Gross Axle Weight
Rating (Rear)
U.S.: 1,874 lbs (850 kg)
*1
1,841 lbs (835 kg)
*2
Canada: 855 kg
Light Bulbs
*
1: Models with halogen headlights
2: Models with LED headlights
55 W (H11)
*1
Headlights (Low Beam)
LED
*2
60 W (HB3)
*1
Headlights (High Beam)
LED
*2
35 W (H8)
LED
3 W
Front Turn Signal Lights
21 W (Amber)
*1
Fog Lights
*
Parking/Daytime Running Lights
Front Side Marker Lights
LED
*2
LED
21 W
21 W (Amber)
LED
16 W
LED
LED
LED
Map Lights 8 W
8 WCeiling Light
Vanity Mirror Lights
*
2 W
Cargo Area Light 5 W
Side Turn Signal Lights
(on Door Mirrors)
*
Brake Lights
Rear Turn Signal Lights
Rear Side Marker Lights
Back-Up Lights
Taillights
High-Mount Brake Light
Rear License Plate Light
Interior Lights
Testing of Readiness Codes
Your vehicle has readiness codes as part of the onboard self-diagnostic system.
Some states use these codes for testing to verify whether your vehicle’s emissions
components are working properly. The codes may not be read if you go through the
testing just after the battery has gone dead or been disconnected.
To check if they are set, turn the vehicle on without starting the engine. The
malfunction indicator lamp will come on for several seconds. If it goes off, the
readiness codes are set. If it blinks five times, the readiness codes are not set.
If you are required to have your vehicle tested before the readiness codes are set,
prepare the vehicle for retesting by doing the following:
1. Fill the gas tank to approximately 3/4 full.
2. Park the vehicle and leave the engine off for 6 hours or more.
3. Make sure the ambient temperature is between 40°F and 95°F (4°C and 35°C).
4. Start the engine without touching the accelerator pedal, and let it idle for 20
seconds.
5. Keep the vehicle in Park (P) or Neutral for manual transmission. Increase the
engine speed to 2,000 rpm, and hold it there for about 3 minutes.
6. Let the engine idle with your foot off the accelerator for 20 seconds.
7. Select a nearby, lightly traveled major highway where you can maintain a speed
of 50 to 60 mph (80 to 97 km/h) for at least 20 minutes. Drive on the highway
with the vehicle in Drive (D) or 5th gear. Do not use cruise control. When traffic
allows, drive for 90 seconds without using the accelerator pedal. (Vehicle speed
may vary slightly; this is OK.) If you cannot do this for a continuous 90 seconds
because of traffic conditions, drive for at least 30 seconds, then repeat two more
times (for a total of 90 seconds).
8. Drive in city or suburban traffic for at least 10 minutes. When traffic conditions
allow, let the vehicle coast for several seconds without using the accelerator
pedal or the brake pedal.
9. Park the vehicle and leave the engine off for 30 minutes.
The readiness codes are erased when the battery is disconnected, and set again
only after several days of driving under a variety of conditions.
If a testing facility determines that the readiness codes are not set, you may be
requested to return at a later date to complete the test, or see your dealer.
To Next Page
Loading...
