Do you have a question about the Honda Accord 2019 and is the answer not in the manual?
Brand | Honda |
---|---|
Model | Accord 2019 |
Category | Automobile |
Language | English |
Conforms to FCC and Industry Canada regulations for radio frequency devices.
Information is believed accurate but not warranted by American Honda Motor Co., Inc.
Vehicle may share location and usage info. Manage via www.hondalink.com/vehicle-data-choices.
Records vehicle dynamics and safety data in crash/near-crash situations.
Records powertrain performance data for diagnostics and emissions law verification.
Provides basic information and instructions for the 2019 Honda Accord Sedan.
Access the most current Owner's Manual online via owners.honda.com or myhonda.ca.
First registered owner can request a complimentary printed Owner's Manual.
American Honda Motor Co., Inc. protects environment via electronic delivery of information.
Contact Honda for vehicle questions or dissatisfaction with dealer information.
Provides 24-hour emergency road service in the U.S. and Canada.
Identifies controls located on and around the steering wheel of the vehicle.
Guide explains safety features; use good judgment for safe operation.
Explains DANGER, WARNING, CAUTION, and NOTICE messages used throughout the guide.
Information on avoiding carbon monoxide exposure from vehicle exhaust.
Explains seat belt importance, proper use, and inspection for safety.
Guidelines for correct seat belt positioning and use to maximize protection.
Instructions for regularly checking seat belts for wear and proper function.
Step-by-step guide on how to properly fasten a seat belt.
How to adjust the shoulder anchor for proper seat belt positioning.
Overview of the vehicle's airbag system, including front, knee, and advanced airbags.
Explains the function and location of front and knee Supplemental Restraint System airbags.
Details advanced airbag features for reduced injury risk to smaller occupants.
Describes side airbags located in seat-backs for torso and pelvis protection.
Explains side curtain airbags for head protection in side impacts and rollovers.
Key information on proper posture, objects near airbags, and airbag covers.
Explains the SRS and Passenger Airbag Off indicators and their meanings.
Indicates when the front passenger airbag is automatically turned off due to occupant weight.
Lists and describes the various components of the vehicle's airbag system.
Instructions on when to have airbag system components inspected by a dealer.
Recommends restraining children aged 12 and under in rear seats due to airbag risks.
Key considerations for safely seating children, including airbag risks and proper restraint.
Guidelines for properly restraining infants in rear-facing child seats.
Recommendations for properly restraining smaller children in forward-facing child seats.
Criteria for selecting an appropriate LATCH-compatible or seat belt installed child seat.
Step-by-step guide for installing a child seat using LATCH lower anchors.
Instructions for installing a child seat using a vehicle's lap/shoulder seat belt.
How to use a tether anchorage point for additional child seat security.
Guidelines for securing larger children in rear seats with lap/shoulder seat belts or booster seats.
Identifies the locations of safety labels that warn of potential hazards.
How to report safety defects to NHTSA (U.S.) or Transport Canada.
Explains critical red and amber indicators that signal a vehicle problem.
Explains the BRAKE indicator for low brake fluid or system malfunction.
Indicates low engine oil pressure, requiring immediate attention.
Signals if the battery is not charging, requiring electrical item shutdown.
Indicates a problem with airbag systems or seat belt tensioners.
Indicators that may require the driver to perform an action.
Reminder to release the parking brake before driving.
Alerts to unfastened seat belts for driver and front passenger.
Indicates low fuel level; blinking means a fuel gauge problem.
Alerts for low tire pressure or TPMS malfunction.
Appears on the driver information interface with more details on conditions or malfunctions.
Indicates if the key or remote transmitter is not recognized by the vehicle.
Reminds when an item is on or off, like VSA, LKAS, ACC.
Adjusts instrument panel brightness using the control dial.
Controls for interior lighting settings, including ON and Door Activated modes.
Buttons to turn map lights on or off.
Displays information such as tachometer, range, fuel, warnings, and maintenance.
Projects vehicle information like speed and navigation onto the windshield.
How to lock or unlock doors and trunk using the remote transmitter.
Unlocks/locks doors and trunk by carrying the remote transmitter.
Automatically locks doors and trunk when walking away from the vehicle.
Personalize auto door lock and unlock preferences via the audio/information screen.
Methods to lock or unlock doors using the lock tab or inner handle.
Explains how to use the lock tab on doors to unlock specific doors or all doors.
How the inner handle unlocks the driver's door and all other doors.
How to use the master switch to lock or unlock all doors and the trunk.
Prevents rear doors from being opened from the inside.
How to unlock and open the trunk using the driver's door button.
Instructions for operating power windows automatically or manually.
Disables passenger window operation, allowing only the driver's window to operate.
How to open, close, and tilt the power moonroof.
Controls for operating interior and exterior lights.
How to operate exterior lights, including headlights, fog lights, and automatic high beams.
Quick method for signaling lane changes with a three-blink sequence.
System automatically switches between high and low beams based on driving conditions.
System applies steering torque to keep vehicle between lane lines.
Alerts and assists if the system detects unintended lane departure.
How to turn LKAS and RDM systems on or off.
Assists in potential collisions by alerting and applying brakes.
Describes the three alert stages for a possible collision within CMBS.
How to adjust CMBS settings via the HOME screen.
How to turn the CMBS system on or off using the safety support switch.
Alerts to vehicles in the left or right blind spot while driving.
Allows checking passenger side rear areas on the audio/information screen.
How to activate LaneWatch via turn signal or button for blind spot view.
How to customize LaneWatch display and activation.
Sensors monitor obstacles near the vehicle, providing distance alerts.
Alerts to detected vehicles approaching from rear corners when in Reverse.
Displays a real-time image behind the vehicle with parking guidelines.
How to turn the rear camera guidelines on or off.
Factors affecting fuel economy and emissions, including driving habits and vehicle condition.
Proper fuel usage and refueling procedures for optimal performance and safety.
Recommendations for unleaded gasoline octane and additives.
Step-by-step guide on how to refuel the vehicle at a service station.
Essential checks before operating the vehicle, including exterior and interior.
Checks for obstructions, frost, snow, ice, hood, trunk, tire condition, and surroundings.
Securing items, adjusting seating, mirrors, and steering wheel for safe driving.
Information on carrying cargo and the vehicle's maximum load capacity.
Specifies the maximum load capacity for the vehicle type.
Guidelines for towing trailers, including load limits and engine considerations.
Details on total trailer weight, tongue load, and their impact on vehicle performance.
A checklist of items to ensure before towing a vehicle.
Specific procedures for towing the vehicle behind a motorhome.
How to use the remote transmitter to start the vehicle's engine.
Procedure for remotely starting the engine and extending its run time.
How the remotely started engine automatically shuts off.
Steps to turn on the vehicle and start the engine for driving.
Steps before starting the engine for CVT models, including parking brake application.
Steps before starting the engine for automatic transmission models.
Steps before starting the engine for manual transmission models.
How to cycle through power modes (Accessory, On) using the ENGINE START/STOP button.
How to change the shift position based on driving needs.
Explains the functions of Park (P), Reverse (R), Neutral (N), Drive (D), and Sport (S) modes.
How to use paddle shifters to change gears without removing hands from the steering wheel.
How to select gears using buttons on the steering wheel or center console.
How to select the Drive mode and release the parking brake.
Explains foot brake operation, brake assist, and ABS for safe stopping.
How to use the brake pedal to slow down or stop the vehicle.
How to apply and release the electric parking brake for stationary parking.
System that keeps the brake applied after releasing the pedal.
How to turn on the Automatic Brake Hold system.
Steps to activate the Automatic Brake Hold system.
Methods to cancel the Automatic Brake Hold system.
Increases braking force during hard or emergency braking.
System that pumps brakes to prevent wheel lockup and maintain steering control.
Color-coded bars around the speedometer indicating driving style.
Helps stabilize the vehicle and maintain traction on slippery surfaces.
How to turn the VSA system on or off using the control panel button.
Driver support system using radar and camera sensors for safety features.
Maintains speed and following interval, decelerates and stops for detected vehicles.
How to activate ACC with Low Speed Follow and set vehicle speed and interval.
How to increase or decrease vehicle speed while using ACC.
How to change the following interval for ACC.
How ACC operates when a vehicle is detected ahead or cuts in.
Methods to cancel ACC, including button presses or brake pedal.
How to switch from ACC to standard cruise control.
Provides steering input to keep vehicle in lane and alerts for drifting.
System applies steering torque to keep vehicle between lane lines.
Alerts and assists if the system detects unintended lane departure.
How to turn LKAS and RDM systems on or off.
Assists in potential collisions by alerting and applying brakes.
Describes the three alert stages for a possible collision within CMBS.
How to adjust CMBS settings via the HOME screen.
How to turn the CMBS system on or off using the safety support switch.
Alerts to vehicles in the left or right blind spot while driving.
Allows checking passenger side rear areas on the audio/information screen.
How to activate LaneWatch via turn signal or button for blind spot view.
How to customize LaneWatch display and activation.
Sensors monitor obstacles near the vehicle, providing distance alerts.
Alerts to detected vehicles approaching from rear corners when in Reverse.
Displays a real-time image behind the vehicle with parking guidelines.
How to turn the rear camera guidelines on or off.
Factors affecting fuel economy and emissions, including driving habits and vehicle condition.
Proper fuel usage and refueling procedures for optimal performance and safety.
Recommendations for unleaded gasoline octane and additives.
Step-by-step guide on how to refuel the vehicle at a service station.
Procedure to follow if the shift lever cannot be moved out of Park (P).
Information about weak remote transmitter battery and starting the engine.
Step-by-step guide for jump starting a vehicle with a dead battery.
Signs of engine overheating and immediate actions to take.
How to stop the engine in an emergency situation while driving.
How the TPMS monitors tire pressure and what to do if an indicator comes on.
Explains why the TPMS indicator might illuminate or blink.
Steps to take when the TPMS indicator is active.
Federal explanation of TPMS function, limitations, and maintenance.
Step-by-step guide for replacing a flat tire with the spare.
Specific instructions for vehicles equipped with a compact spare tire.
Steps to prepare for changing a tire, including opening trunk and removing tools.
How to properly position and set up the vehicle jack.
Detailed steps for removing the flat tire and mounting the spare.
How to properly store the removed flat tire, jack, and tools.
Location of engine compartment and interior fuse boxes.
Steps for checking, removing, and replacing blown fuses.
General safety rules to follow when performing vehicle maintenance.
Specific safety tips regarding fire, flammables, cleaning agents, eye protection, and ventilation.
Precautions regarding vehicle stability, hot parts, and moving parts during maintenance.
System that notifies when maintenance services are due based on vehicle data.
How to view maintenance information and engine oil life on the display.
Codes indicating scheduled maintenance services for U.S. and Canadian models.
Location of key components under the hood, like engine oil, coolant, and battery.
Step-by-step guide on how to safely open the vehicle's hood.
Procedure for checking the engine oil level using the dipstick.
Specifications for the recommended engine oil for the vehicle.
How to add engine oil, including precautions to avoid overfilling.
How to reset the engine oil life indicator after an oil change.
How to check and add engine coolant, including safety precautions.
How to check the coolant level in the reserve tank.
Step-by-step instructions for adding coolant to the system.
How the battery condition is monitored and potential issues.
How to check and refill the window washer fluid reservoir.
Fluid level checks for brakes and clutch, and recommended fluid type.
Step-by-step guide for replacing worn wiper blades.
Importance of proper tire type, size, condition, and inflation for safe operation.
Guidelines for proper tire inflation pressure for handling, tread life, and comfort.
What to check when inflating tires, including damage and wear indicators.
How to identify worn tires using tread wear indicators.
Location and information on the tire and loading label on the driver's doorjamb.
How to read the tire identification number on the sidewall.
Guidelines for replacing tires and wheels, including matching specifications.
Factors affecting tire life and recommendations for inspections and replacement.
Recommendations for using winter tires and tire chains.
Instructions for installing tire chains on front tires.
Definitions of common tire-related terms like cold tire pressure and load rating.
Explanation of DOT grading for treadwear, traction, and temperature.
How tire quality grades are found and explained.
Explanation of tire traction grades (AA, A, B, C) for stopping on wet pavement.
Explanation of tire temperature grades (A, B, C) for heat resistance.
Recommendations for servicing the refrigerant system.
How readiness codes are part of the self-diagnostic system for emissions testing.
How to check if readiness codes are set and what to do if they are not.
Details passenger capacity, weights, and engine information.
Specifications for brake and clutch fluid type and capacity.
Fluid type and capacity for automatic transmissions.
Fluid type and capacity for manual transmissions.
Recommended oil type, capacity, and change intervals.
Coolant type, capacity, and mixture ratio.
Tire sizes and recommended pressures for various models.
Specifications for various interior and exterior light bulbs.
Tire sizes and recommended pressures for various models.
Washer fluid tank capacity for U.S. and Canada.
Fluid type and capacity for brakes and clutch.
Answers to common questions about vehicle operation and features.
Information on how to contact Honda dealers and customer service.
Summary of warranties covering the new vehicle, excluding emissions and accessories.
Covers vehicle's emissions control systems, with conditional terms.
Covers seat belts that fail to function properly.
Covers exterior body panels that rust from the inside.
Covers Honda accessories.
Covers Honda replacement parts against defects.
Provides prorated coverage for replacement batteries.
Covers replacement mufflers for the duration of ownership.
How to obtain information on emission warranties or report violations.
Commands for accessing Phone, Audio, and Navigation features.
Voice commands for making calls by name, number, or category.
Voice commands for controlling audio sources like radio, SiriusXM, and USB.
Voice commands for map, destination entry, and route management.