If your Honda Motorcycle engine won't start, several factors could be at play. Begin by verifying the engine starting procedure is correct. Ensure there's gasoline in the fuel tank and that the engine stop switch is in the appropriate position. Inspect for a loose battery connection or corrosion at the battery terminals, and assess the battery's condition. If the PGM-FI malfunction indicator lamp (MIL) is illuminated, it is recommended to contact your dealer as soon as possible.
D
Debra MorganAug 15, 2025
What to do if Honda Motorcycle engine is overheating?
J
Jeffrey RasmussenAug 16, 2025
If your Honda Motorcycle engine is overheating, and the high coolant temperature indicator comes on, check that the radiator fan is operating. If acceleration becomes sluggish, pull safely to the side of the road and stop the engine using the ignition switch. Allow the engine to cool with the ignition switch in the OFF position. Check the coolant level in the reserve tank and add coolant as needed. If a leak is detected or the fan is not operating, do not start the engine and transport your vehicle to your dealer. If the above checks are normal, you may continue riding but closely monitor the high coolant temperature.
J
Jason HamiltonAug 19, 2025
What to do if Honda CB1000R 2022 Motorcycle low oil pressure indicator is on?
M
martinezjoshuaAug 19, 2025
If the low oil pressure indicator illuminates on your Honda Motorcycle, pull safely to the side of the road and stop the engine. Check the engine oil level and add oil as necessary. Start the engine and only continue riding if the low oil pressure indicator goes off. If the engine oil level is rapidly decreasing, or the indicator remains on, stop the engine and contact your dealer.
N
Natalie StaffordAug 25, 2025
How to fix Honda CB1000R 2022 battery goes dead?
B
Brandon SmithAug 25, 2025
To address a dead battery on your Honda Motorcycle, charge the battery using a motorcycle battery charger. If the battery does not recover after recharging, contact your dealer.
V
vmartinezAug 27, 2025
What does it mean if ABS indicator light is on Honda CB1000R 2022?
S
Stacy MartinAug 27, 2025
If the ABS (Anti-lock Brake System) indicator on your Honda Motorcycle comes on or starts flashing while riding, reduce your speed. If the indicator does not come on when the ignition switch is in the ON position, or if it doesn't go off at speeds above 6 mph (10 km/h), reduce your speed. Turn the ignition switch to the OFF position, and then to the ON position again. It is recommended to have your vehicle inspected by your dealer as soon as possible.
J
Justin StaffordAug 31, 2025
What does it mean if torque control indicator is on Honda CB1000R 2022 Motorcycle?
J
Jamie WintersAug 31, 2025
If the Torque Control Indicator on your Honda Motorcycle comes on and stays solid while riding, reduce your speed. If the indicator does not come on when the ignition switch is turned to the ON position, reduce your speed. If the indicator does not go off at speeds above 3 mph (5 km/h), your vehicle will have normal riding ability without Torque Control function. It is recommended to have your vehicle inspected by your dealer as soon as possible.
T
Tony ChristensenSep 3, 2025
How to pair a smartphone with Honda CB1000R 2022?
J
Justin CarterSep 3, 2025
To pair a smartphone with your Honda Motorcycle, check your surroundings to ensure no other Bluetooth® device being paired is present before re-pairing. Make sure that the vehicle and smartphone are both in pairing mode, and verify that the vehicle pairing information is deleted from your smartphone Bluetooth® setting.
G
Gary PerkinsSep 7, 2025
How to replace a blown fuse on Honda Motorcycle?
A
Ashley AllenSep 7, 2025
To replace a blown fuse on your Honda Motorcycle:
1. See 'Inspecting and Replacing Fuses.'
2. Remove the fuse box cover.
3. Pull the fuses out one by one with the fuse puller in the tool kit and check for a blown fuse.
4. Always replace a blown fuse with a spare fuse of the same rating.
5. Reinstall the fuse box cover.
6. Reinstall the front seat.
To Next Page
General
