f
Press
SEL
button. The brightness level is
switched.
u You can adjust the brightness level from
five levels.
g
Press
SET
button. The brightness of the REV
indicator is set, and then the display moves
to the display setting of the tachometer.
2 Changing of tachometer display
mode:
You can change the display mode of the
tachometer.
a
Press
SEL
button to switch the display
mode of tachometer.
b
Press
SET
button. The currently selected
display mode is set, and then the display
moves to the ordinary display.
Operation Guide
42
Instruments (Continued)
To Next Page
Loading...
