2 Changing of tachometer display
mode:
You can change the display mode of the
tachometer.
Conventional display
Shows the engine RPM on the upper (a)
and lower segments (b).
Full display
Shows the engine RPM on the upper (c)
and lower segments (d).
The upper and lower segments show the
same range.
Shift up display
Shows the engine RPM on the lower segment
(e).
Shows the setting range of the REV indicator
on the upper segment (f).
Setting of REV indicators
(P.23
)
Peak hold display
Shows the engine RPM on the upper (g)
and lower segments (h).
The upper segment keeps to show the
maximum engine RPM temporarily.
Ex Engine revolutions per minutes
8,000 r/min (rpm)
Operation Guide
27
Continued
Conventional
display
Full display
Shift up displayPeak hold display
To Next Page