Selecting the Quick Shifter mode
a
Turn the ignition switch to the ON position.
b
Press and hold the
MODE
button until the
Quick Shifter indicator is flashing.
c
Press the
MODE
button until the desired
setting is selected.
d
To end the setting, press and hold the
MODE
button.
The setting can also be set by turning the
ignition switch to the OFF position.
The control is automatically switched from
the Quick Shifter setting mode to the
ordinary display if the vehicle is started. Even
in this case, established setting is maintained.
Operation Guide
45
MODE
button
Quick Shifter
indicator
To Next Page