1.
Loosen the minor lock nut and turn the
minor clutch cable adjuster all the way in
(to provide maximum freeplay). Tighten
the minor lock nut.
2.
Slide the cable boot.
3.
Loosen the major lock nut.
4.
Turn the major clutch cable adjuster until
the clutch lever freeplay is 10 - 20 mm
(0.4 - 0.8 in).
5.
Tighten the major lock nut and check the
clutch lever freeplay.
6.
Return the cable boot.
7.
Start the engine, pull the clutch lever in,
and shift into gear. Make sure the engine
does not stall and the vehicle does not
creep. Gradually release the clutch lever
and open the throttle. Your vehicle should
move smoothly and accelerate gradually.
If proper adjustment cannot be obtained or
the clutch does not work correctly, see your
dealer.
Clutch u Adjusting the Clutch Lever Freeplay
Maintenance
79
Major lock
nut
Major clutch
cable adjuster
+
-
Cable boot
To Next Page