Do you have a question about the Honda CBR600F4i and is the answer not in the manual?
Compression Ratio | 12.0:1 |
---|---|
Ignition | Computer-controlled digital transistorized with electronic advance |
Transmission | 6-speed |
Final Drive | O-ring-sealed chain |
Front Tire | 120/70ZR-17 |
Rear Tire | 180/55ZR-17 |
Engine Type | 599cc liquid-cooled inline four-cylinder |
Bore x Stroke | 67mm x 42.5mm |
Fuel System | PGM-FI |
Front Suspension | 43mm HMAS cartridge fork |
Rear Suspension | Pro-Link single shock with spring-preload adjustability |
Front Brake | Dual 296mm discs with four-piston calipers |
Rear Brake | Single 220mm disc |
Rake | 24.0° |
Trail | 96 mm |
Seat Height | 810 mm |
Fuel Capacity | 18 L |
Weight | 370 pounds (dry) |
Emphasizes wearing helmets and eye protection for rider safety and injury reduction.
Advises on being visible to other drivers through clothing and positioning.
Details recommendations for protective gear, including helmets, boots, gloves, and suits.
Explains motorcycle capacity and weight limits for riders and cargo.
Warns against unauthorized modifications and recommends genuine accessories for safety.
Identifies controls on the handlebars, including switches and levers for operation.
Presents a numbered diagram of the instrument panel and its indicators.
Explains the function of each numbered indicator on the instrument panel.
Describes the Immobilizer System and Coolant Temperature meter indicators.
Details the functions of the multi-function display, including fuel and speed.
Describes the initial display sequence when the ignition is turned ON.
Details the various components of the multi-function display and associated buttons.
Explains how the low oil pressure and malfunction indicators behave.
Explains how the fuel indicator works and its display functions.
Details speedometer, odometer, and tripmeter functions.
Describes changing speed and mileage units.
Provides instructions for setting the clock.
Explains temperature display and overheating warnings.
Instructions for adjusting front suspension preload.
Steps for adjusting rear suspension damping.
Inspecting front and rear brake pads for wear.
Details adjusting clutch lever free play.
Step-by-step guide to checking engine oil level.
Recommends spark plugs and care precautions.
How to check and adjust throttle grip free play.
Checking drive chain slack and adjusting.
Checking front and rear brake pads for wear.
Recommends specified tire sizes and warns about improper installation.
Explains ignition switch positions and key removal.
Explains how the HISS immobilizer system works.
Information about keys and immobilizer registration.
Describes engine stop and headlight switches.
Explains headlight dimmer, passing light, and turn signal switches.
Instructions for locking and unlocking steering.
Steps for seat removal and installation.
Location of helmet holders and safety warning.
Instructions for removing and installing front cowls.
Essential checks before riding.
Procedures for starting the engine safely.
Safety checks and gear shifting guidance.
Instructions for normal braking and safety tips.
Explains why regular maintenance is essential.
Lists items requiring service at scheduled intervals.
Lists tools provided in the kit.
Explains location of serial numbers.
Guides on selecting engine oil viscosity.
Importance of oil and filter for engine service life.
Steps to drain oil and replace filter.
Recommends spark plugs and care precautions.
How to clean spark plugs and check gap.
How to adjust throttle grip free play.
Procedure for adjusting idle speed.
Checking drive chain slack and adjusting.
Methods for lubricating and cleaning drive chain.
Procedures for inspecting fork and swingarm bearings.
Checking side stand spring and ignition cut-off.
Steps for removing the front wheel.
Procedures for installing the front wheel.
Steps for removing the rear wheel.
Checking front brake pad wear.
Checking rear brake pad wear.
Information on battery condition and level.
Steps for removing the battery.
Explains fuse failure indicates circuit issues.
Location of fuse box and types of fuses.
Steps for replacing fuses.
Safety precautions for bulb replacement.
Steps for replacing the headlight bulb.
Procedure for replacing stop/taillight bulb.
General advice on cleaning the motorcycle.
Detailed steps for washing the motorcycle.
Guidelines for preparing the motorcycle for storage.
Steps for removing the motorcycle from storage.
Specifications for dimensions, weight, and capacities.
Engine bore, stroke, idle speed, and valve clearance.
Specifications for chassis geometry and tyre sizes.
Specifications for battery, generator, and lights.
Explains converter function and care guidelines.