101
uuIndicatorsu
Continued
Indicator Name On/Blinking Explanation
Malfunction
Indicator Lamp
●
After you have set the power mode to ON,
the vehicle performs system checks.
However, if the readiness codes have not
been set by that time, this indicator will
blink five times and then go off.
●
Readiness codes are part of the on-board
diagnostics for the emissions control systems.
2 Testing of Readiness Codes P. 811
●
Comes on if there is a problem with the
emissions control systems.
●
Blinks when a misfire in the engine's
cylinders is detected.
2 If the Malfunction Indicator Lamp Comes On
or Blinks P. 786
Charging System
Indicator
●
Comes on when there is a problem with
the charging system.
●
Stop in a safe place and contact a dealer
immediately.
2 Checking the Battery P. 738
2 If the Charging System Indicator Comes On
P. 786
Shift Position
Indicator
*
●
Indicates the current shift position.
2 Shifting P. 491, 493
M (7-speed
manual shift mode)
Indicator/Shift
Indicator
*
●
Comes on when the 7-speed manual shift
mode is applied.
2 7-Speed Manual Shift Mode P. 495
* Not available on all models
24 CIVIC HATCHBACK TYPE R-31T406201.book 101 ページ ２０２４年２月６日 火曜日 午後４時３０分
To Next Page
Loading...
