431
uuHomeLink® Universal Transceiver
*
uTraining HomeLink
Continued
Training HomeLink
If it is necessary to erase a previously entered
learned code:
• Press and hold the I and III HomeLink
buttons for about 10 seconds, until the
green indicator blinks. Release the buttons,
and proceed to step 1.
• If you are training the second or third
button, go directly to step 1.
The instructions on the next page should work for most gate or garage openers, but
may not work for all. For detailed instructions about your specific remote opener,
visit http://www.homelink.com or call (800) 355-3515.
Indicator
I HomeLink
Button
III HomeLink
Button
24 CIVIC HATCHBACK TYPE R-31T406201.book 431 ページ ２０２４年２月６日 火曜日 午後４時３０分
To Next Page
Loading...
