20230714150511_42MKE6210_eng_BOOK Page 29 Friday, July 14 2023 15:07:32 JST
Operation Guide
22
Switches (Continued)
Mode Selection
a
Start the engine.
b
With your vehicle stopped and the throttle
closed, push and hold the engine mode
select button for 1 or more second.
Make sure that the fast idle knob is pushed
in.
(P.
28)
If the fast idle knob is pulled out, the engine
mode will not change.
c
Release the engine mode select button. The
engine mode indicator will indicate a
selected mode by the number of times the
indicator blue blinks.
d
Repeat steps 2 – 3 until the desired mode is
indicated.
PGM-FI mode 1
PGM-FI mode 2
PGM-FI mode 3
To Next Page
Loading...
