Frame/ Body Panels
1-10
TOP SHELTER
REMOVAL/INSTALLATION
Remove the radiator shrouds 1-4.
Remove the fuel tank cap [1].
Release the fuel tank breather hose A [2] from the guide
[3].
Remove the bolt/washer [4] and top shelter bolt [5].
Remove the top shelter [6].
Temporarily install the fuel tank cap.
Installation is in the reverse order of removal.
• Align the top shelter tab [7] with the fuel tank slot [8].
TORQUE:
Top shelter bolt:
5.2 N·m (0.5 kgf·m, 3.8 lbf·ft)
[1]
[4] [2] [3]
[5]
[6]
[8]
[7]
REAR FENDER A
REMOVAL/INSTALLATION
Remove the side covers 1-4.
Remove the rear fender screws [1] and rear fender A [2].
Installation is in the reverse order of removal.
• Align the rear fender A tab [3] with the rear fender B
slot [4].
TORQUE:
Rear fender screw:
1.5 N·m (0.2 kgf·m, 1.1 lbf·ft)
To Next Page