Air Cleaner
Improper installation of the air cleaner assembly
may allow dirt and dust to enter the engine and
cause rapid wear of the piston rings and cylinder.
12.Close the air cleaner housing cover (1) and
turn the quick fastener (2) clockwise.
NOTICE
8. Apply a thin coat of Honda White Lithium
Grease or equivalent to the sealing surface
between the air cleaner element and air
cleaner element holder.
9. Assemble the air cleaner element and holder.
Install the tab (7) of the holder in the hole (8)
of the air cleaner element tab (9).
10.Install the air cleaner assembly into the air
cleaner housing.
11.Carefully position the sealing flange of the
element to prevent dirt intrusion.
Align the access tab (10) of the air cleaner
element holder with the “ ” mark (11) of the
air cleaner housing by rotating the air cleaner
assembly counterclockwise. Install and tighten
the air cleaner retaining bolt (3) securely.
(3) air cleaner retaining bolt
(10) access tab
(11) “ ” mark
52 Servicing Your Honda
To Next Page
Loading...
