CLUTCH/GEARSHIFT LINKAGE
9-20
Install
the
dowel pins and a
new
gasket.
Install the right crankcase cove
r.
Install and tighten
the
eight
cover
bolts in a criss-
cross pattern several steps.
Install the kickstaner pedal as
shown
and
tighten
the bolt.
Hook the
return
spring
to
the brake pedal and
spring
holding pin as
shown
.
Install the footpeg bar (page 6-6),
Adjust the brake pedal free play (page 3-16).
Pour
the recommended
engine
oil
(page 3-11),
Adjust the clutch (page 3-17).
To Next Page
Loading...
