Honda CRF50F 2004-2015 - Nuts, Bolts, Fasteners; Spark Arrester

SPARK ARRESTER
Remove the three bolts, spark arrester and gasket
from the muffler.
Use a soft brush to remove carbon deposits from
the screen mesh, being careful not to damage it.
The spark arrester must be free of breaks and holes.
Replace
if necessary.
MAINTENANCE
SCREEN MESH
Install the spark arrester with a new gasket into the r~ ~ ~~~~~~~~~~- G '-- A CS- K C E C T :-- !:! - ~ C---'
muffler. IIiijjjIII
Tighten the three bolts securely.
NUTS, BOLTS, FASTENERS
Check that all chassis nuts and bolts are tightened to
their correct torque values (page 1-10).
Check that all safety clips, clamps and cable stays
afe in place and proper ly secured.
ARRESTER
3-19