Honda CRF50F 2005 - Clutch Spring Measurement; Clutch Disc Thickness Inspection; Clutch Plate Warpage Check; Primary Drive Gear;Clutch Center Guide Inspection

CLUTCH/GEARSHIFT LINKAGE
9-10
Clutch sp ring
Measure the clutch spring free length.
SERVICE LIMIT: 19.4 mm (0 .76 in)
Clutch disc
Replace the clutch discs
if they show signs of scor-
ing or discoloration.
Measure the disc thickness
of each disc.
SERVICE LIMITS:
Clutch disc A:
Clutch disc B:
C lut ch plate
2.3 mm (0.09 in)
3.0 mm (0.12 in)
Check each disc plate for warpage on a surface pl ate
using a feeler gauge.
SERVICE LIMIT: 0.20 mm (0.008 in)
Primary drive gear/clutch center guide
Check the primary drive gear and clutch center
guide for excessive wear or damage.
Measure the LO.of the primary drive gear.
SERVI CE LIMIT: 21.05 mm (0.829 in)
Measure the 0 .0. and I.D. of the clutch center guide .
SERVICE LIMITS:
1.0 .: 17 . 04 mm (0.671 in)
0 . 0.: 20.90 mm (0.823 in)