Honda CRF50F 2005 - Service Information

SERVICE INFORMATION
GENERAL
CLUTCH/GEARSHIFT LINKAGE
• This section covers service of the cl utch and gearshift linkage. All service can be done with the engine installed in the
frame .
• Use care not to allow dust or dirt to enter the engine.
SPECIFICATIONS
TORQUE VALUES
Clutch outer cover screw
Clutch lock nut
Clutch assembly screw
Shift dr um stopper arm bolt
Shift return spring pin bolt
Gearshift cam plate bolt
TOOLS
Lock nut wrench, 20 x 24 mm
077 16-0020100
4.4 N·m (0.45 kgf·m, 3.3 Ibf.ft)
42 N'm (4.3 kgf-m, 31 IbHt)
5.9 N·m (0.6 kgf·m, 4.3 Ibf·ft)
13 N-m (1.3 kgf ·m, 9 Ibf.h)
29 N'm (3.0 kgf·m, 22 Ibf.ft)
17 N'm (1.7 kgf · m, 12Ibf.ft)
Extension bar
07716·0020500
or equivalent commercially avai l-
able in U.S.A.
Flywheel holder
07725-0040000
or equivalent commercially avail-
able in U.S.A.
9-3