Honda CRF50F 2005 - Straighten Lock Washer Tab; Remove Clutch Lock Nut; Remove Washers and Clutch Assembly; Remove Primary Drive Gear

Straighten the tab of the lock washer.
Hold the clutch outer with the flywhee l holder and
remove the lock nut using the special too ls as
shown.
TOOLS:
Flywh eel ho ld er 07725-0040000
(Equivalent com-
merciallyavailable
in U.S.A .)
Lock nut wrench , 20 x 24 mm 07716-0020100
Extension bar 07716-0020500
(Equivale nt com-
mer ciall yavai lable
in U.S.A .)
Remove the lock washer B, 14 mm lock washer and
CLUTCH/GEARSHIFT LINKAGE
clutch assembly. 1.1.' ;;;; ';;;
Remove the primary drive gear.
9-7