(1)
(2)
(3)
(4)
(5)
(4) seat
(5) prongs
(1) clips
(2) screws
(3) bolts
56
Seat Removal
Servicing Your Honda
Safety PrecautionsRefer to on page . Removal
Remove the clips ( ) and screws ( ) on the
fuel tank shroud.
Remove the bolts ( ) under the rear fender.
Slide the seat ( ) with fuel tank shroud and
rear cowl back.
Installation
Install the bolts and screws and tighten them,
then install the clips.
Position the prongs ( ) under the seat into
the spaces for them in the frame.
1.
1.
2.
2.
45
3. 4
3
21
5
０８／０３／１９ ０９：５７：４０ ３１ＧＥＬ６９０ ００６５
To Next Page
Loading...
