Need help?Do you have a question about the Honda HF2218 and is the answer not in the manual?
General| Cutting Height Adjustment | Lever |
|---|---|
| Cutting Height Positions | 7 |
| Deck Material | Steel |
| Displacement | 530 cm³ |
| Cutting Width | 48 inches |
| Cutting Height | 30-90 mm |
| Dry Weight | 228 kg |
| Fuel Tank Capacity | 8.5 L |
| Length | 72 inches |
Explains warning symbols and manual references for safety information.
General safety rules for training, preparation, and operation to prevent hazards.
Explains the meaning of safety decals displayed on the machine.
Details about the machine's identification plate, serial number, and specifications.
Explains the key parts of the machine by number and function.
Covers unpacking, fitting steering wheel, seat, and battery connection.
Details fitting grass-catcher brackets and assembling the unit.
Covers steering wheel, choke, accelerator, and key ignition controls.
Details parking brake, light switch, pilot lamps, and warnings.
Explains blade engagement, cutting height, drive pedals, and transmission.
Covers safety recommendations and pre-start checks like oil and tyre pressure.
Details starting, moving, braking, reverse, and grass cutting operations.
Covers mowing on slopes, transporting, and obtaining a good cut.
Covers safety during maintenance and general lubrication points.
Details routine checks, adjustments, and replacements for machine and engine.
Covers blade adjustments, deck alignment, brake, belts, and parts replacement.
Information on the stone-guard kit for use without a grass-catcher.
To Next Page
