Need help?Do you have a question about the Honda HHT31S and is the answer not in the manual?
Provides essential safety guidelines and explains hazard symbols, warnings, and cautions.
Details general safety rules, protective gear, and keeping clear of hazards.
Emphasizes wearing safety glasses, hearing protection, and appropriate clothing for injury prevention.
Warns about the danger of spinning blades and the need to wait for them to stop.
Advises on safe use of attachments and warns against unauthorized modifications.
Outlines employer responsibilities for operator safety, training, and equipment maintenance.
Identifies the location and importance of safety labels on the trimmer.
Describes cutting-line heads, debris shields, and suitable line types for grass and weeds.
Details different types of blades (grass/weed, weed/brush, brush/wood) and their associated shields.
Provides a chart showing the suitability of different cutting attachments for various tasks.
Illustrates and labels the key components and controls on the trimmer models.
Explains the function and operation of the choke lever, ignition switch, and operator presence lever.
Details the function of the throttle set button for starting and disengaging it.
Explains the priming bulb's role in starting the engine by pumping fuel.
Describes how to use the recoil starter grip to start the engine.
Lists supplied equipment like shoulder harnesses and safety glasses, and their use.
Guides the user on essential checks for personal readiness, knowledge, and physical condition.
Details recommended clothing for safety, including avoiding loose items and securing hair.
Stresses the importance of safety glasses, goggles, or face shields to protect against thrown debris.
Recommends wearing hearing protectors to prevent noise-induced hearing loss.
Outlines pre-operation checks for the trimmer, including safety, cutting attachment, and maintenance inspections.
Details checks for leaks, damaged parts, and secure fasteners before starting the engine.
Provides instructions on adjusting the harness and balancing the trimmer for comfortable operation.
Covers crucial safety measures like avoiding enclosed spaces, handling vibration, and proper startup procedures.
Step-by-step guide for starting a cold or warm engine, including choke and priming bulb usage.
Instructions on how to safely stop the engine, including a warning about coasting blades.
Explains how to quickly detach the trimmer from the harness using the quick-release latch.
Details the correct operating position and posture for stable and safe trimmer control.
Explains how to use the throttle trigger to control engine speed and cutting force.
Guides on how to release nylon line from manual-feed and semi-matic cutting heads.
Provides guidance on using blades, including safety precautions and blade maintenance.
Lists essential safety practices for operating the trimmer, especially on uneven terrain or in poor visibility.
Explains the phenomenon of blade thrust (kickback) and how to reduce the risk of losing control.
Offers advice on techniques like scything for efficient brush clearing and debris management.
Provides techniques for trimming and edging, including working against hard surfaces and avoiding obstacles.
Details how to safely operate the trimmer on slopes, focusing on stability and debris direction.
Highlights why regular maintenance is crucial for safety, performance, and longevity.
Lists critical safety precautions to follow before and during any maintenance or repair tasks.
Presents a detailed schedule for regular service intervals for various trimmer components.
Covers engine-related maintenance, including checking and changing engine oil.
Specifies the type and viscosity of engine oil recommended for the trimmer.
Details how to inspect the air filter for cleanliness and damage.
Explains how to check the throttle cable for smooth operation and damage, and how to adjust it.
Guides on inspecting, servicing, and installing cutting attachments like nylon line heads.
Provides step-by-step instructions for cleaning, disassembling, and reassembling the manual-feed cutting head.
Details the process for cleaning, unlocking, and reassembling the semi-matic cutting head.
Explains how to remove and install trimmer heads, including specific tools and procedures.
Describes the process for removing and installing different types of debris shields.
Covers blade inspection, sharpening, replacement, and safety precautions.
Provides instructions for installing a saw blade, including torque specifications.
Details how to inspect, clean, gap, and replace the spark plug for optimal engine performance.
Guides on servicing the spark arrester to maintain its functionality and prevent emissions issues.
Specific instructions for servicing the spark arrester on the HHT25S model.
Stresses the critical role of correct assembly for safety and machine reliability.
Lists key safety measures to follow during the assembly process.
Instructions for unpacking the trimmer and its components, and verifying the parts list.
Lists all loose parts included with the trimmer and advises on checking for missing items.
Provides specific instructions for assembling the UNBA type trimmer, including handlebar installation.
Instructions related to using a saw blade, including head removal and debris shield changes.
Details the procedure for removing the cutting-line head assembly from the trimmer.
Step-by-step guide for installing a saw blade, including alignment and torque specifications.
Instructions on how to remove the blade cover for maintenance or replacement.
Guidance on how to properly install the blade cover after use or maintenance.
Covers the process of checking and adding engine oil to the trimmer.
Refers to the refueling section for essential information on handling and adding fuel.
Outlines essential steps for preparing the trimmer for storage to prevent rust and ensure easy startup.
Details how to clean the trimmer, engine, and specific parts before storage.
Discusses fuel deterioration during storage and options for extending fuel life.
Advises on selecting a safe storage location and using appropriate covers to prevent fire and corrosion.
Instructions for checking the trimmer after storage and preparing it for use.
Safety checks and cooling time required before loading the trimmer onto a vehicle.
Guidelines on how to securely fasten the trimmer for transport to prevent damage.
Lists common starting issues and their possible causes and corrections.
Addresses problems like low power or failure to increase speed, with troubleshooting steps.
Covers issues where the cutting head won't stop turning or won't turn, and excessive vibration.
Provides technical details on serial numbers, high altitude operation, and carburetor modifications.
Shows where to find the engine and frame serial numbers for identification and service.
Explains the use of oxygenated fuels, their composition, and potential effects on the engine.
Details the engine's emissions control system, its sources, and compliance with regulations.
Lists symptoms that may indicate emissions-related issues and advises on seeking professional repair.
Explains the Air Index system for comparing engine emissions performance and durability.
Presents detailed specifications for the HHT25S and HHT31S models, including features and dimensions.
Provides information on finding dealers, warranty service, and contacting customer support.
Lists additional available Honda publications like shop manuals and parts catalogs.
To Next Page
General
