Honda HRJ216 User Manual

57
Tighten the blade disc holder bolt with a torque wrench. Set a flat blade
screwdriver at the engine's bolt to prevent the blade disc from turning
when tightening the blade disc holder bolt, tighten the blade disc holder
bolt to the specified torque.
Blade disc holder bolt tightening torque:
53.9 N
•m (5.5 kgf•m)
6. After installing the blade/blade disc check that it does not interfere with
the housing. If the blade contacts the housing, consult an authorized
Honda servicing dealer.
A bent blade can be the cause of serious personal injury or accident.
If you don’t have a torque wrench, have an authorized Honda servicing
dealer tighten the blade setting bolts and the blade disc holder bolt
before you use the mower. If the the blade setting bolts and the blade
disc holder bolt are overtightened, they could break. If the the blade set-
ting bolts and the blade disc holder bolt are not tightened enough, they
could loosen or come out. In either case, it would be possible for the
blade to fly off while you are operating the mower.

Honda HRJ216 Specifications

General

Brand	Honda
Model	HRJ216
Category	Lawn Mower
Language	English