Heating
To Heat
To warm the interior:
1. Start the engine.
2. Select and Fresh Air mode.
3. Set the fan to the desired speed.
4. Adjust the warmth of the air with
the temperature control dial.
To Defog and Defrost
To remove fog from the inside of the
windows:
1. Press the button.
2. Adjust the temperature control
dial so the air flow from the
defroster vents feels warm.
3. Turn on the rear window deffoger
to help clear the rear window.
To remove exterior frost or ice from
the windshield and side windows
after the car has been sitting out in
cold weather:
1. Start the engine.
2. Press the button.
3. Adjust the fan and temperature
controls to maximum.
To rapidly remove exterior frost or
ice from the windshield (on very cold
days), first select the Recirculation
mode. Once the windshield is clear,
select the Fresh Air mode to avoid
fogging the windows.
Comfort and Convenience Features
To Next Page
Loading...
