This indicator has two functions:
It flashes when VSA is active
(see page ).
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. If it comes on at
any other time, it indicates that the
passenger’s side airbag has
automatically shut off. You will also
see a ‘‘PASSENGER SIDE AIRBAG
OFF’’ message on the multi-
information display. For more
information, see page .
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. For more information, see
page .
Itcomesonasareminderthatyou
have turned off the vehicle stability
assist (VSA) system.
If the VSA indicator illuminates, hill
start assist will not be working.
Without hill start assist, the vehicle
will roll downhill immediately when
you release the brake on an incline.
You will also see a ‘‘CHECK VSA
SYSTEM’’ or ‘‘CHECK HILL START
ASSIST SYSTEM’’ message on the
multi-information display (see page
).
Ifitcomesonandstaysonatany
other time, there is a problem with
the VSA or hill start assist system.
Take your vehicle to a dealer to
have it checked. Without VSA,
your vehicle still has normal
driving ability, but will not have
VSA traction and stability
enhancement. See page for
more information on the VSA
system.
34
1.
2.
295
295
295
90
Instrument Panel Indicators
Vehicle Stability Assist
(VSA) System IndicatorSide Airbag Off
Indicator
VSA OFF Indicator
Instruments and Controls
65
U.S. Canada
To Next Page
