Adjust Outside Temp. Display
If you sometimes find that the
temperature reading is a few degrees
above or below the actual
temperature, you can adjust it by
following these instructions:
While ‘‘METER SETUP’’ is shown in
the ‘‘CUSTOMIZE GROUP’’ of the
multi-information display, press the
SEL/RESET button. The screen
changes to ‘‘CUSTOMIZE MENU.’’
Press the INFO (
/ ) button until
you see the above display.
Press the SEL/RESET button. The
screen changes as shown above. The
highlighted number is the current
setting above or below the outside
temperature. Press the INFO (
/ )
button repeatedly until the number
you want appears, then press the
SEL/RESET button to enter your
selection.
U.S.
Canada
CONTINUED
Multi-Information Display
91
Instruments and Controls
11/06/16 17:42:51 12 ACURA RDX MMC North America Owner's M 50 31STK650 enu
To Next Page