Need help?Do you have a question about the Honda VFR 750F and is the answer not in the manual?
General| Displacement | 748 cc |
|---|---|
| Bore x Stroke | 70.0 mm x 48.6 mm |
| Compression Ratio | 11.0:1 |
| Transmission | 6-speed |
| Final Drive | Chain |
| Rear Suspension | Pro-Link single shock, adjustable preload and rebound damping |
| Front Tire | 120/70-17 |
| Engine Type | Liquid-cooled 4-stroke DOHC V4 |
| Fuel System | Carburetor |
| Front Suspension | Telescopic fork |
| Front Brakes | Dual disc |
| Rear Brakes | Single disc |
| Seat Height | 800 mm |
| Fuel Capacity | 21 liters |
| Max Power | 105 hp (78 kW) @ 10, 500 rpm |
Information on motorcycle capacity and passenger limits.
Emphasizes paying attention to warnings, cautions, and notes.
Introduction to the manual's guidance on operation and maintenance.
Rules for safe operation, including pre-ride inspection and rider qualifications.
Warning about modifications and removal of original equipment.
Guidelines for adding accessories and luggage, emphasizing stability and performance.
Information on tubeless tires, valves, and rims, including proper air pressure.
Instructions for emergency external repair of tubeless tires.
Information on tire replacement, wheel balancing, and foreign object intrusion.
Instructions for checking and adjusting front fork air pressure.
Guidance on adjusting front suspension air pressure based on load and conditions.
Procedure for adjusting the anti-dive device for rider's choice of position.
Procedure for removing the side cover and adjusting rear spring preload.
Instructions for adjusting spring preload by turning the adjust knob.
Hazards associated with the rear shock absorber, including explosion risks and handling precautions.
Explanation of the fuel reserve indicator lamp and its operation.
Instructions for using the tripmeter to calculate mileage and reset it.
Explanation of the coolant temperature gauge, normal operating range, and warnings.
Location and operation of the ignition switch, including OFF, ON, P, and LOCK positions.
Function of the engine stop switch and its proper positioning.
Procedure for locking and unlocking the steering using the ignition switch.
Operation of the passing light switch for signaling.
Operation of the horn button.
Location and use of the seat's storage compartment for documents and the owner's manual.
Procedure for using the helmet holder to secure the helmet and prevent theft.
Procedure for adjusting the headlight beam vertically and horizontally.
Capacity, opening procedure, fuel type, and warnings for the fuel tank.
Location and operation of the fuel valve for ON, OFF, and RES positions.
Guidance on selecting engine oil viscosity based on riding area temperature.
Pre-ride inspection checklist for essential items like engine oil, fuel, and brakes.
Checking tire pressure, wear, and damage.
Ensuring all lights operate properly.
Checking drive chain condition, tension, lubrication, and replacement.
Safety warnings regarding exhaust gases and running the engine in confined areas.
Steps for starting the engine, shifting gears, and coordinating controls for smooth riding.
Procedure for changing engine oil, including draining, filter replacement, and torque specifications.
Procedure for removing, inspecting, cleaning, and adjusting spark plugs.
Instructions for checking the clutch fluid level and identifying leaks.
Inspection and adjustment of the drive chain, including slack, wear, and lubrication.
Brake fluid level maintenance, checking brake pads and fluid leaks.
Step-by-step instructions for removing the front wheel, including disconnecting speedometer cable and brake caliper.
Step-by-step instructions for removing the rear wheel, including loosening nuts and chain adjustment.
Procedure for replacing fuses in the fuse box, including warnings about fuse amperage and short-circuits.
Battery care procedures, including electrolyte level check, charging, and breather tube routing.
Recommendation for using ethylene glycol base anti-freeze with corrosion inhibitors for aluminum engines.
Adjusting the stoplight switch to ensure proper operation and timing.
List of tools included in the kit and precautions for use.
Location of frame and engine serial numbers for registration and parts ordering.
Procedure for preparing the motorcycle for long-term storage, including draining fluids and protecting parts.
To Next Page
